SMC擺動氣缸SMC旋轉執行器,CDRA1BS100-180C-A54

SMC擺動氣缸SMC旋轉執行器,CDRA1BS100-180C-A54

附圖示出的外觀在90°和100°的旋轉。
尺寸顯示加壓到B端口。
附圖示出了磁性開關安裝在左舷。
是尺寸為180°和190°的旋轉。

該軸順時針旋轉時的壓力從A端口施加。
順時針旋轉端位置用角度調整螺釘進行調整。
采取適當?shù)拇胧瑥亩鴽]有過大的外部沖擊或振動施加到角度調整螺釘。
如果不這樣做可能導致的角度調節螺釘松動或下降。

SMC擺動氣缸SMC旋轉執行器,CDRA1BS100-180C-A54

Drawing shows the appearance for rotation of 90° and 100°.
Dimensions show pressurization to B port.
Drawing shows the auto switch mounted on the port side.
are the dimensions for rotation of 180° and 190°.
The shaft rotates clockwise when the pressure is applied from the A port.
The clockwise rotation end position is adjusted using the angle adjusting screw.
Take appropriate measures so that no excessive external impact or vibration is applied to the angle adjusting screw.
Failure to do so may cause the angle adjusting screw to become loose or drop.

AF30-03C-2 AF40-06C-Z AF50-06-R AF800-14-7-40
AF30-03C-2R AF40-06D AF50-06-W AF800-14-8
AF30-03C-6 AF40-06D-2 AF50-06-X401 AF800-14D
AF30-03C-8 AF40-06D-6 AF50-06-Z AF800-14-D
AF30-03C-J AF40-06D-7-2 AF50-10 AF800-14-R
AF30-03C-R AF40-06D-8 AF50-10-2 AF800-14-X242
AF30-03C-W AF40-06D-J AF50-10-2-X425 AF800-F12
AF30-03C-Z AF40-06D-R AF50-10-2-X430 AF800-F12-127-2
AF30-03D AF40-06D-W AF50-10-6 AF800-F14